Electrical. steam trap to max. 1.400,0 m³/min

BEKOMAT 16

Exemplary representation: Electronic, level-controlled condensate drain
1872,57€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Advantages:
•No pressure loss while draining,
•Very large condensate outlet, as a result resistant to accumulation of dirt in the condensate,
•Error message can be retrieved via dry contact (5 V DC - 230 V AC, 10 - 1000 mA),
•THE standard for condensate technology


Temperature range:
+1°C to +60°C (for lower temperatures, a heating is available upon request)

Power supply:
230 V AC (type BEKOMAT 31 U and BEKOMAT 32 U: 95-240 V AC/100-125 V DC), on request, other voltages

Protection class:
IP 65 (Type BEKOMAT 31 U and BEKOMAT 32 U: IP 67)

Operating pressure:
0,8 to 16 bar

Optional:
For oil-free condensate, use -CO
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Condensate Contains oil / oil free
max. Compressor supply amount* [m³/min] 1.400,0
max. Dryer performance [m³/min] 2.800
Condensate inflow (female thread) G 1" , 2x G 3/4", G 1/2"
Depth [mm] 280
Width [mm] 260
Height *** [mm] 280 (49)
Wear part set BEKOMAT 16 VERSCH
BEKOMAT16
{{ $t('shop.all.gewicht') }} 6 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 84219910
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }} Beko
{{ $t('shop.all.dokumente') }}
*Based on 1 bar reduction and 20°C, **Delivered without dry contact, ***Height of the lowest lateral inlet in brackets
 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.

  • {{ $t(error) }}