FUTURA air units, 2-piece., G 1/4", 0,1 to 1 bar, model series.1

Version:
Self-relieving filter regulator with attached lubricator

Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:
-10°C to +50°C

Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)

Condensate draining:
semi-automatic**

Pressure gauge connection:
G 1/4" (model series 0: G 1/8")

Pore width in the filter:
5 µm

Media:
Compressed air, neutral gases

Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).

Max. condensate amount:
28 cm³

Switch panel thread:
M 36x1,5

Oil metering at 1000 l/min:
approx. 1 - 2 drops/min

Oil supply:
40 cm³

Lubricator reaction limit (at 6 bar):
90 l/min

Scope of delivery:
Air unit, including 50 mm pressure gauge

Flow:
90 to 1750 l/min, secondary relieving: 70 l/min

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si

Version	Air unit
Thread	G 1/4"
Pressure regulation range [bar]	0.1 - 1
Container design	Plastic container with protective cage
Condensate drain	Semi-automatic
Pressure gauge display [bar]	0 - 1.6
Mounting brackets	W 1 F
Coupling kit	KP 1 F
Coupling kit with wall console	KPW 1 F
input pressure [bar]	1.5 - 16

{{ $t('shop.all.gewicht') }}	750 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84811005