Item group

Service units, 2-part, - Multifix model series 1, 1200 l/min*****

Exemplary representation: Wartungseinheit 2-teilig - Multifix-Baureihe 1 Schematic symbol

Version:

Reversible filter regulator with attached lubricator (model series 0 with micro-mist lubricator)

Materials:

Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:

-10°C to +60°C

Pressure gauge connection:

G 1/4" (model series 0: G 1/8")

Pore width in the filter:

5 µm (model series 5: 40 µm)

Condensate draining:

semi-automatic****

Media:

Compressed air, neutral gases

Advantages:

•Automatic venting in the event of overpressure on the secondary side,
•Easy assembly of individual components using coupling kits within a model series and thread size,
•Hand wheel can be locked by pressing down on it

Input pressure:

1.5 - 16 bar

Max. condensate amount:

25 cm³

Switch panel thread:

M 30x1,5

Oil metering at 1000 l/min:

approx. 1 - 2 drops/min

Oil supply:

50 cm³

Lubricator reaction limit (at 6 bar):

60 l/min

Flow:

60 to 1200 l/min *****

Scope of delivery:

Air unit, including 50 mm pressure gauge

ATEX:

Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not E-11 closure or electrical level monitoring)

Optional:

can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, Version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 to 16 bar) -AMNC, electrical level monitoring -N, Safety version: can be locked with upstream lockable ball valve and start-up valve -Si

Advantages:

•can be filled with oil while under pressure
*Standard series, please prefer for use, since the pressure control range is universally usable, **Drip cap made of a metal/glass combination,***Volkswagen closer (is supplied without a spanner),****As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented, *****measured at P1 = 10 bar P2 = 6.3bar and 1 bar pressure drop

{{ $t('shop.all.dokumente') }}:

  • Documentation dokuneutral/doku_wartungsgeraete_multifix_n.pdf
    Documentation: Decision aid for selection of air units dokuneutral/entscheidungshilfe_wartungsgeraete_n.pdf
{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

{{ $t('shop.display.artikelgruppe.filtern') }}

{{ filter.Eigenschaft.EigenschaftName }}
{{ $t('shop.display.artikelgruppe.kein_eintrag') }}
Service units, 2-part, - Multifix model series 1, 1200 l/min*****:
{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.

  • {{ $t(error) }}