MULTIFIX air units (1), 2-piece., G 3/8", 0,5 to 10 bar

CL 38 *

Exemplary representation: 2-part maintenance unit - Multifix series 1 Schematic symbol
102,62€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Version:
Reversible filter regulator with attached lubricator (model series 0 with micro-mist lubricator)

Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:
-10°C to +60°C

Pressure gauge connection:
G 1/4" (model series 0: G 1/8")

Pore width in the filter:
5 µm (model series 5: 40 µm)

Condensate draining:
semi-automatic****

Media:
Compressed air, neutral gases

Advantages:
•Automatic venting in the event of overpressure on the secondary side,
•Easy assembly of individual components using coupling kits within a model series and thread size,
•Hand wheel can be locked by pressing down on it


Input pressure:
1.5 - 16 bar

Max. condensate amount:
25 cm³

Switch panel thread:
M 30x1,5

Oil metering at 1000 l/min:
approx. 1 - 2 drops/min

Oil supply:
50 cm³

Lubricator reaction limit (at 6 bar):
60 l/min

Flow:
60 to 1200 l/min *****

Scope of delivery:
Air unit, including 50 mm pressure gauge

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not E-11 closure or electrical level monitoring)

Optional:
can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, Version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 to 16 bar) -AMNC, electrical level monitoring -N, Safety version: can be locked with upstream lockable ball valve and start-up valve -Si

Advantages:
•can be filled with oil while under pressure
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Version Air unit
Thread G 3/8"
Pressure regulation range [bar] 0.5 - 10
Container design Plastic container
Condensate drain Semi-automatic
Pressure gauge display [bar] 0 - 16
Mounting brackets W 1
Mounting brackets with panel union nut MW 1
Coupling kit KP 1
input pressure [bar] 1.5 - 16
CL38
{{ $t('shop.all.gewicht') }} 750 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 84811005
{{ $t('shop.all.dokumente') }}
    Documentation dokuneutral/doku_wartungsgeraete_multifix_n.pdf
    Documentation: Decision aid for selection of air units dokuneutral/entscheidungshilfe_wartungsgeraete_n.pdf
    3D CAD file (volume model) protected/cad/3d/70381/cl381738.stp
  • {{ $t('shop.display.datenblatt.titel') }} (Print view)
*Standard series, please prefer for use, since the pressure control range is universally usable, **Drip cap made of a metal/glass combination,***Volkswagen closer (is supplied without a spanner),****As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented, *****measured at P1 = 10 bar P2 = 6.3bar and 1 bar pressure drop
 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.

  • {{ $t(error) }}